Multipurpose Carpet & Carpet Tile Adhesive 2

D-1500™ Universal Flooring Adhesive is a premium, firm-set/medium grab,water-based, acrylic adhesive for bonding rubber, vinyl, carpet, felt-backed linoleum, and cork floor coverings, as well as rubber and vinyl stair treads, over properly prepared concrete, cement board, or plywood subfloors.D-1500 is formulated using special acrylic polymer emulsions and tackifiers that enable a choice of installation options, including “wet-set” or “pressure sensitive” techniques. D-1500 displays tenacious early bond strength, is specially formulated to be highly resistant to plasticizer migration from vinyl, and will not show migration staining. D-1500 contains Bostik’s Blockade™ antimicrobial protection, which inhibits the growth of bacteria, mold or mildew on the surface of the dried adhesive; the dried adhesive resists stains caused by mold and mildew.

D-990™ is a multipurpose, firm setting, latex adhesive with excellent wet suction and extended tack time for pattern matching and seam adjustments. D-990 may be used for extended wear interior installations of most types of carpet backings and felt backed sheet goods. Use D-990 over structurally sound dry concrete (on, above, or below grade), APA underlayment grade plywood, and well bonded VCT and resilient flooring.

D-920™ is a fast grab, multipurpose latex adhesive with excellent wet suction and re-tack for heavy to extreme duty interior installations of most types of carpet backings (direct glue down and double stick) and felt backed sheet goods. Use D-920 over structurally sound dry concrete (on, above, or below grade), APA underlayment grade plywood, and well bonded VCT and resilient flooring. D-920 is recommended for backings including: rubber, jute, ActionBac®, enhancer, closed cell urethane, latex unitary, woven, Axminster and Wilton, hot melt, and felt backed sheet goods (including those manufactured by Armstrong®, Congoleum®, Domco®, Mannington®, and Tarkett®).

D-910™ is a fast grab, multipurpose latex adhesive with excellent wet suction for heavy-duty interior installations of most types of carpet backings and felt backed sheet goods. Use D-910 over structurally sound dry concrete (on, above, or below grade), APA underlayment grade plywood, and well bonded VCT and resilient flooring. D-910 is recommended for backings including: rubber, jute, ActionBac®, enhancer, closed cell urethane, latex unitary, woven, and felt backed sheet goods (including those manufactured by Armstrong®, Congoleum®, Domco®, Mannington®, and Tarkett®).

D-905™ is a fast grab, multipurpose latex adhesive for light to heavy-duty interior installations of most types of carpet backings and felt backed sheet goods. Use D-905 over structurally sound dry concrete (on, above, or below grade), APA underlayment grade plywood, and well bonded VCT and resilient flooring. D-905 is recommended for backings including: rubber, jute, ActionBac®, enhancer, closed cell urethane, woven, and felt backed sheet goods (including those manufactured by Armstrong®, Congoleum®, Domco®, Mannington®, and Tarkett®).

D-808™ Exterior Carpet Adhesive is a high performance, non-flammable, fast grab, firm set, low-VOC adhesive designed for bonding most outdoor carpets. D-808 may be used over clean, dry exterior sufaces including: fully cured cement, seasoned asphalt, terrazzo and exterior/marine-grade plywood. D-808 is a low-VOC formulation that meets the toughest air quality restrictions, including SCAQMD1168 and CRI Green Label Plus.

D-870™ is a fast drying, soft set, tacky, latex adhesive for use when installing most types of carpet square backings and carpet pad. D-870 offers a long open time for re-positioning and pattern layout. Once dry, the pressure sensitive characteristic allows for efficient changing of damaged carpet squares without the need to re-apply adhesive.

D-860™ is a soft set, latex adhesive that stays flexible for years. The long open time of D-860 allows for accurate pattern matching. D-860 is recommended for use on double stick installations and is suitable to bond most types of carpet backings including: hot melt, unitary, woven, Axminster®, Action Bac® and jute backings over Tred Mor® Cushion System, Pad-Loc and Dubl-Bac by Fairmont, Hartex 2000, PeraLoom® and Nova Slab® by Leggett & Platt®, Dynathane®, Performer, Legacy, Reticele and other carpet pads.

DURABOND® D-850™ is a fast grab carpet adhesive for use in commercial and residential installations of most types of carpet backings. Use D-850 over structurally sound dry concrete (on, above, or below grade), APA underlayment grade plywood, and well bonded VCT and resilient flooring. D-850 is recommended for backings including: rubber, jute, ActionBac®, enhancer, closed cell urethane, latex unitary and woven.

D-670™ is a firm-set, latex adhesive with good slip time for pattern and seam matching of felt backed sheet goods for light to heavy-duty commercial installations. Use D-670 over structurally sound dry concrete (on, above, or below grade), APA underlayment grade plywood, and well bonded VCT and resilient flooring. D-670 is recommended for installing felt backed sheet goods including those manufactured by Armstrong®, Congoleum®, Domco®, Mannington®, and Tarkett®.